Fujikura 45S Fusion Splicer

This Fujikura splicer introduces a groundbreaking enhancement by enabling the simultaneous preparation and loading of both fibers. The handheld fiber coating stripper, SS-05, efficiently strips two 250 μm coated fibers in a single pass, complemented by the CT-16A cleaver adapter plate, which can cleave two bare fibers concurrently. Post-preparation, the patented sheath clamps of the 45S facilitate loading both fibers simultaneously into the splicer, with one fiber in each hand. The user can effortlessly close the sheath clamp base by pressing down, allowing for convenient one-handed operation while positioning the fibers in the v-grooves. Moreover, the sheath clamps are intricately connected to the wind protector. Upon completion of the splicing process, opening the wind protector automatically releases both sheath clamps, facilitating swift sleeve positioning and transfer to the tube heater. The tube heater excels in rapid sleeve shrinking, outperforming its predecessor with a nominal heat time of approximately 20 seconds for 60 mm sleeves, down from the previous ~26 seconds. Previously, when using sheath clamps, if the cleaved fiber was accidentally set past the electrode centerline, the splicer would send an error and require manual intervention. The 45S will now accept this mistake and reverse the fiber to correct position automatically. The 45S Single Fiber Fusion Splicing Kit offers a splicer with cladding alignment, automatic fusion control, Bluetooth, plus a CT50 fiber cleaver. With a compact cube form factor, it is effortlessly adaptable to space-constrained environments making it the ideal splicer to use when portability, ruggedness, speed, and reliability are needed.

Features :

• Used with SM and MM fibers, approx. 125µm cladding diameter and up to 3mm coating diameter
• Simultaneous fiber preparation capability (2 fibers) with newly patented sheath clamp design
• Sheath clamps automatically opened with the wind protector
• Automatic fiber placement correction
• Active Fusion Control for arc optimization with every splice
• Active Blade Management for cleave quality monitoring and correction
• 6-second splicing in SM FAST mode and 15 to 22-second heat time for 60mm sleeves
• 100 splice and 30 heat modes
• Adjustable 5" touchscreen can alleviate glare from the sun and adjust with abnormal splicer positions
• Storage for 20,000 results
• Fully ruggedized for shock, moisture and dust resistance

Applications

• 5G Small Cell Site
• FTTx drops and terminations
• MDF/IDF splices and terminations
• Rural fiber deployments and restorations